湘中锑矿区土壤重金属锑的污染特征

文章研究调查了冷水江锡矿山锑矿区、桃江板溪锑矿区、桃江马迹塘锑矿区、桃江武潭锑矿区、安化符竹溪金锑矿区及安化渣滓溪锑矿区及周围土壤中锑的含量及形态分布.结果表明:各矿区土壤中总锑含量范嗣为185.6-2 081.3 mg/kg,大大超过了土壤中锑的背景值,表明各矿区土壤已被严重污染.采用Tessier逐级提取法对土壤中...     

废弃线路板热解油中酚类物质的提取与分离

将FR-4型废弃线路板热解,并对热解油中含量最多的组分-酚类物质进行分离提取.比较研究线路板热解油的分离提取方法,探索出"碱液处理-酸化-萃取-减压蒸馏"的新方法,对分离出的组分进行GCMS(气质联用)测试.结果显示运用该方法对FR-4型线路板的热解油进行提取分离,得到的总酚占热解油的62.0%,其中苯酚的最高纯度可达...     

有机质对土壤气相抽提去除四氯化碳效率的影响

某重要岩溶地下水源地因附近农药厂排放含四氯化碳污水而受到严重污染,实验采用土柱通风试验模拟土壤气相抽提(SVE),研究环境温度为20℃,通风速率为40mL/min,土壤含水率10%,而土壤有机质含量分别为3.02%和0.13%条件下的两种供试土壤中四氯化碳污染物的去除过程.结果表明,土柱通风能有效去除土壤中的四氯化碳污...     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

Evaluation of soil washing process with carboxymethyl-β-cyclodextrin and carboxymethyl chitosan for recovery of PAHs/heavy metals/fluorine from metallurgic plant site

Polycyclic aromatic hydrocarbons(PAHs)/heavy metals/fluorine(F) mixed-contaminated sites caused by abandoned metallurgic plants are receiving wide attention. To address the associated environmental problems,this study was initiated to investigate the feasibility of using carboxymethyl-β-cyclodextrin(CMCD) and carboxymethyl chitosan(CMC) solution to enhance ex situ soil washing for extracting mixed contaminants. Further,Tenax extraction method was combined with a first-three-compartment model to evaluate the environmental risk of residual PAHs in washed soil. In addition,the redistribution of heavy metals/F after decontamination was also estimated using a sequential extraction procedure. Three successive washing cycles using50 g/L CMCD and 5 g/L CMC solution were effective to remove 94.3% of total PAHs,93.2% of Pb,85.8% of Cd,93.4% of Cr,83.2% of Ni and 97.3% of F simultaneously. After the 3rd washing,the residual PAHs mainly existed as very slowly desorbing fractions,which were in the form of well-aged,well-sequestered compounds; while the remaining Pb,Cd,Cr,Ni and F mainly existed as Fe–Mn oxide and residual fractions,which were always present in stable mineral forms or bound to non-labile soil fractions. Therefore,this combined cleanup strategy proved to be effective and environmentally friendly.     

2-萘酚生产废水综合治理与资源化利用工程实例

针对2-萘酚生产废水p H值低、色泽深,亚硫酸盐和萘磺酸盐高、COD浓度高的特点,采用酸化脱硫-两级络合萃取-氧化絮凝工艺处理,介绍了专利工艺的流程设计,给出了主要工艺设计参数及投资运行成本。工程运行结果表明,该工艺设计合理、技术成熟、处理效果稳定,2-萘酚生产废水经处理后达到GB 8978—1996《污水综合排放标准》一级排放标准要求;回收的萘磺酸钠固体可返回2-萘酚生产系统套用;反萃取黑液经蒸发浓缩,合成的减水剂产品各项指标达到或超过GB 8076—2008《混凝土外加剂》高效减水剂指标要求。     

热强化气相抽提对不同质地土壤中苯去除的影响

研究应用电阻加热强化气相抽提技术对砂土、壤土和黏土中苯去除效果的影响及作用机制.与常规抽提结果相比,在热强化处理作用下气相抽提对砂土和壤土中苯的去除效率提高了13.1%和12.3%,处理时间分别降低75%和14%.热强化处理使得黏土含水率下降,土壤渗透率升高,黏土颗粒表面羧基和乙基的吸收峰消失,有机质含量减少,苯的去除效率与对照相比提高了34%.对于砂土和壤土,热强化主要是通过促进苯在土体中扩散来提高去除效率,从而实现在较短时间内污染物质的大量去除;而对于黏土则是通过降低土壤颗粒表面有机基团的含量,从而降低污染物和土壤颗粒的吸附能力,并通过降低含水率和升高渗透率从而提高土壤中气体的扩散性能,以达到增强气相抽提效果的目的.     

固相萃取-高效液相色谱法测定水中丙烯酰胺研究

采用固相萃取-高效液相色谱法对水中的丙烯酰胺定性、定量分析。结果显示:丙烯酰胺含量在20μg/L~400μg/L之间呈良好线性关系,回归方程Y=0.476 8X+0.845 4,相关系数R为0.997 72,检出限0.1μg/L,样品回收率在71.85%~92.28%之间,相对标准偏差为3.4%~10.9%。该方法减少了有机溶剂用量,缩短了有机溶剂暴露时间,降低污染,且能满足地表水环境质量标准(GB 3838-2002)限值要求,是水中丙烯酰胺含量准确稳定的检测方法。用该方法测定了呼和浩特市引黄入呼左岸、右岸、中浅和中深4个断面水样,均未检出丙烯酰胺。